Easy woodworking project: Coat Rack for Creative Outlet

The upper hooks hold one jacket

The middle hooks hold a jacket or umbrella

I needed a coat rack.  My chairs always have one or two thrown over them. The space behind my door would be a good place but I couldn't seem to find one that fits or one I was willing to pay for.  I also need to make something  with results that I can see.  This rack is six 1/2 feet tall, can store two tiers of stuff and hide behind my inside door.  Also, it is made from scrap.  The only thing I bought was the hardware.  The total cost was about $20. 

The need to create is within us all. I wonder how much anxiety is caused by the fact that so much of our work has no touch-able result. Some people create with paint on a canvas while others create with paint on a house.   Regardless of your medium, sometimes we just need a creative project that has results in a short period of time.  Today this coat rack meets this spiritual need in me.  Silly perhaps but its done, I feel a sense of satisfaction and my sportcoat isn't wadded up on the floor.

Simple legs glued and screwed

Materials used:  A 2x4x8" ripped in half (or a 2x2x8').  Mine was a leftover that had been used.  I cut out the nail holes.  TitebondII glue, 4-1 1/2 inch sheetrock screws. four 2 1/2" by 3" hooks at the top and four smaller "coathooks" all from Walmart.  Leftover 'special walnut' stain and semi-gloss urethane-from my office table.

Tools used:  table saw, sander, drill, router with rounding bit, phillip's screwdriver.  With 2 ready made 2x2's and ignoring the router, all of this could have been done by hand with a miter box.  I have about 2 hours of work with additional time for the glue and finished to dry.  I used what I had on hand and only had to purchase the hardware.

Step by Step:
1. Ripped a 6' 2x4 in half.  A store bought 2x2 would be fine.  You could leave it at 5' and not bother with the second row of hooks.
2. used a rounding bit in a router leaving the top and bottom 6" square
3.  Cut the legs at a 45 degree angle with both angles in.  They are 12" on the long side-they must be precise.  Sand everything before assembly.
4.  Drilled the top of each leg for a 1 1/2" sheet rock screw.  The hole is counter sunk.  Drilling for a 1/4 wooden plug would be  fancier if you have the time.
5.  Square the leg with the bottom of the long 2x2.  Glue with Titebond II or other wood glue and screw it to the bottom.  If I were to do this again I would have molded the top of the legs with the router to match the long rod.  Be doubly sure the legs are square and let them dry-overnight is best.
6.  Stain then coat with 2-3 coats of urethane, sanding between the coats. Dry time on the urethane is over 4 hours on a rainy day.  The more you sand on the first coat the better the results.
7.  Install 4 smaller "towel hooks" in the middle-2.97 for  a pair at Walmart.
8.  Install 4- 4" or longer hooks at the square portion at the top.  These were $2 each at Walmart.
9.  Use well.

It matches my work table, keeps my office neater, and is almost invisible behind the door.  My creative urges have also been met with a project that came out well and could be completed in one weekend.  

2012 Lenten Study "Christian Caregiving by Kenneth Haugk.

Christians care.  Some more than other and some in different ways.  We have different callings, gifts, graces and talents.  Our unique spiritual fingerprints are left behind when we give care in the name of Christ in witness to these things.  Many of us get very uncomfortable when an opportunity to care is presented.  "Christian Caregiving" by Kenneth Haugk tells the story of caregiving.

Christ taught by example and through story.  Haugk's story gives the reader techniques in a way that are caught rather than taught.  Through this a Christian disciple is empowered to take action in the everyday moments that need God's touch.  This builds the disciple and transforms the world in this most basic and defining function of the church.  

"Christian Caregiving" is the introductory course for the Stephen Ministries.  It is designed to bring the disciple into a deeper caregiving life.  This book is over 25 years old and remains a relevant workhorse of a teaching book.  Our church is using it as a Lenten devotional study with the hopes of having a Stephen Ministry forming later.  The book's 20 short chapters are focused and easy to read.  It is a teaching book for the student.  There are few bullet points, only the story that caries the reader to a conclusion requiring a decision to give care.   An outstanding book for pastor's, caring groups, and evangelism committees.  

For more detail on this book and our Lent 2012 study guide, go to http://geekfornonfiction.blogspot.com or email me at revavanhooser@gmail.com.  Again, this is a short course specifically designed for our group of churches.  All of our members and friends can call the office or check out our facebook page for more information also.  

The Stephen Ministries is a group formed on 1975, "for training and organizing laypeople to provide one-to-one Christian care to hurting people in and around your congregation." They have a complete system that is extraordinarily successful in doing this. For more information about forming a Stephen Ministry group and accessing their many resources, go to http://www.stephenministries.org .  

No Sew Worship Banner-A Fabric Prayer with Bling

                                       

The End Result is 4x7' and suits this big wall

We are a church with a "traditional" style without being asleep.  Our sanctuary was built in 1960 and is stately but needs some color.  Banners from the bookstore or church supply run from $150-250 or more.  We need some splash for a lot less cash.  We have a long term plan to make 12 banners over time.  The set will eventually contain three pairs of the large ones in liturgical colors and six smaller ones on the side walls.  We are starting with the names of Christ.  This first one is the test case and came out very well.  The rest will assembled by families or Sunday School Classes receiving them in Kit Form.  This helps the whole of the  church "own" them while keeping them of good quality and unified in theme.

Our secretary laid it out the design very quickly with a laser level with the fabric pinned to the office wall.  She is amazing but it can be easily done on the floor with the yard stick and tape measure. The visual center needs to be a little higher than the actual middle of the fabric.  Allow 2 extra inches at the top for the casing to hold the curtain rod and about 4 inches at the bottom for the "point".  

The shapes were cut out of paper from the computer then traces onto the fabric that had "Wonder Under" ironed onto it.  The shapes were cut out and then ironed onto the fabric.  

The stones and trims were added with Aleene's "Super Fabric" glue. It strings a bit and you have to work fairly quickly but is very strong.  The confirmation kids put the stones where they wanted them and I glued them on in about 15 minutes.  

The shapes and letters were trimmed in strung sequins.  I used a walmart bag to keep the glue strings off of the fabric.  











This was hard for a novice guy-crafter at first. Without the trim the edges were ragged.  


My first thought was to use shirt paint but the sequins added a cleaner line.  







I used cheap vinyl gloves to keep the glue off of my hands and found another benefit.  The sequins did not stick to the gloves and could be pushed down into the glue.  



The fine point of the container caused problems with stringing but gave good control.  By squeezing the sides of the tube you can pull the glue back into the tube and save some of the mess.




The letters took the longest to trim out.  They were cut out of "wonder-undered" fabric after being traces off of computer prints.  The sequins popped them out and made them sharp when seen at a distance.  






A "casing" or pocket was made by turning over 2 inches of the fabric and gluing it at the top with a small bead of the glue.  A cheap telescoping curtain rod slid into it the pocket.  The rod was glued in the middle with the Aleene's glue to keep it from sliding and cording was tied to either end 

The materials: 2 yards Fabric, assortment of assorted acrylic gems, Aleene's Super Fabric glue, 5 yards of strung sequins, 1 telescoping curtain rod, 1 yard 1" fringe, and  2 yards of wonder under iron on material, The project cost was around $40 and took 2-3 hours of time in three sittings.


Tools: plastic bag to shield the glue, small scissors, tape measure, yardstick, vinyl gloves (cheap cleaning ones),




What I learned:

• Start with a good and simple design.  Detail is lost from a distance.  Keep it simple and use few words.  Lighter weight and colored fabrics showed stains from the glue!  Don't get excited though.  They don't show from a distance.
• Have a "Big Picture" plan with a theme and some boundaries.  Yet...let the detail oriented people work up the details. Let the crafters and quilters get on board creatively. Use this as a way to forge a relationship between the congregation and worship.  

• The ratio of 1/2 as wide as it is long is good.  look at your space.  The bigger the space the bigger the banner.  The letters need to be bigger than you think-fill up the fabric with big letters and few words.

• Get a seamstress to lay it out.  My secretary  got the project started correctly and this is how we got such a good result.  .  

• The fabric needs some body or it won't hang straight. This is "sueded" polyester.  It was on sale, looks great and forgave the glue smears.  It should last a long time too.  A quick brush with the lint roller and it looks super.  

• This is not a big group project.  I started this out as a confirmation class project but ended up finishing my self. One or two people that get along can do it quickly.   I glued on all of the sequins in an hour while I watched Leno.  

• You won't lose your "guy card" doing this. Anyone, though a novice and  non-sewer, can achieve great results but I counted on others to pick out the colors.  Lots of people brought pictures and ideas. 

• The fringe on the bottom not only added some flash but  helped to hold the shape of the bottom.  The only thing I would change would be to add some flat gold trim to the sides.

• Don't Forget-this is a prayer and not merely an arts and crafts project. Teach with it, worship with it and expect Christ to use our efforts to make disciples.  

This one looks good now.  More Banners will be added over time

Pictures of the Day: The Lake in Winter